4-3. How to Install the Gear (MODE C)
1 Align the mark on the rotary encoder (S771) with the projection of the assy.
2 Check that the cam (BU U/D) can not be rotated in the direction of arrow.
3 Install the gear (
rotary encoder
(S771)
4-4. How to Install the Gear (MODE CAM)
1 Slide the shaft in the direction of arrow.
2 Align mark A on the gear (mode cam) with mark B on the slider (mode cam) assy,
3 Check that mark C on the gear (mode cam) is in alignment with mark D on the cam (gear).
cam (gear)
mode
C)
gear (
mode
mark
projection
then install the gear (mode cam).
mark A
gear (mode cam)
mark D
– bottom view • front –
cam (BU U/D)
C)
– bottom view • front –
shaft
mark B
mark C
CX-LMN5
chassis
slider (mode cam) assy
19