Assembly; How To Install The Cam (Eject Lock); How To Install The Cam (Gear) - Sony AIWA XR-MN5 Service Manual

CX-LMN5
• This set can be assembled in the order shown below.

4-1. How to Install the Cam (EJECT LOCK)

4-2. How to Install the Cam (GEAR)

18
SECTION 4

ASSEMBLY

1 Rotate the cam (BU U/D) fully in the direction of arrow.
2 Engage the gear (eject lock) and the gear of the cam (eject lock)
aligning the mark with the center of the gear (eject lock).
cam (BU U/D)
gear (eject lock)
– bottom view • front –
1 Check that the cam (BU U/D) can not be rotated in the direction of arrow.
2 Align the mark on the cam (gear) with the boss as shown in the figure
and install the cam (gear).
cam (gear)
cam (BU U/D)
– bottom view • front –
mark
cam (eject lock)
boss
mark