Sony AIWA XR-MN5 Service Manual page 7

Remote commander
Refer to the pages indicated in parentheses for details.
1
2
3
4
5
6
7
Buttons with the same or similar names on the main unit
basically have the same function.
1 POWER (8)
2 1–10/0, >10 (10-12, 15, 19, 20)
CD: selects a track of the specified number.
Tuner: tunes in the station with the specified preset
number.
The numbered buttons take on these functions when pressed with
SHIFT held down
:
CLOCK (8)
Selects clock mode.
TIMER (21, 22)
Selects timer mode.
MUTING (9)
To turn off the sound temporarily.
ADJUSTMENTS BEFORE OPERATION
POWER
6STANDBY/ON
∗ ECO/RDS
m ,M
∗ AEP,UK : ECO/RDS
EXCEPT
AEP,UK : ECO
Power
Turning the unit on
Press POWER 6STANDBY/ON (POWER on the remote ).
Alternatively, press dTAPE, TUNER/BAND, AUX, ECD
or one of the CD slot buttons (1-5). Playback will start
automatically if a disc or tape is loaded.
Turning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
Dimmer
The display window brightness can be selected.
Press DIMMER on the remote.
Each press of the button changes between darker and brighter.
TUNER MODE (15)
Switches between stereo or monaural FM reception.
REV MODE (17, 18, 22)
Selects a reverse mode.
8
DISC/ALBUM (12)
Selects disc mode or album mode on an MP3-CD.
CD EDIT/CHECK (19, 20)
9
Selects edited CD recording.
0
3 SHUFFLE/PROGRAM (11)
Selects shuffle or programmed CD playback mode.
!
@
REPEAT (11)
#
Selects repeat CD playback mode.
4 ALBUM/PRESETN,M (12, 15)
MP3-CD:Skips to a previous or succeeding album.
Tuner: Tunes in a preset station.
f/r,t/g (8, 10-12, 14, 17, 21,
22)
ENTER (8, 14, 15, 21, 22)
Determines the mode.
Stores the received station to preset.
5 ECD (8, 10-12)
TUNER/BAND (8, 14)
dTAPE (8, 17)
AUX (8)
6 DISPLAY (10, 12)
Changes the display in CD playback mode.
DIMMER (8)
Adjusts the display window brightness.
u CD,
POWER
TUNER/
BAND,
CLOCK
Y TAPE,
AUX
u CD,
TUNER/
BAND,
Y TAPE,
AUX
SHIFT
DIMMER
ECO mode
Reduces power consumption in standby mode with the following
operations.
Press ECO/RDS. (AEP,UK : ECO/RDS EXCEPT AEP,UK : ECO)
Each press of the button changes the mode as follows;
ECO ON: Power economizing mode is activated.
When the unit turns off, everything on the display clears and
only the red indicator above POWER lights to show that the
power is being supplied.
ECO OFF: Power economizing mode is cancelled.
When the unit turns off, the clock display appears.
Initial mode is ECO OFF.
Standby power consumption
ECO ON: 0.26 W
ECO OFF: 15 W
SLEEP (21)
Selects sleep-timer mode.
7 SHIFT
Hold down when pressing a numbered button to change
its function to that printed above the number.
8 DISC SELECT (10, 12)
Selects a desired CD slot.
9 CLEAR (11, 15, 21, 22)
CD: Clears a CD program
Tuner: Clears a preset station.
0 i-Bass (9)
TONE (9)
Selects the bass or treble adjusting mode.
! s (10-12, 17, 18, 20)
@ FUNCTION (18-20)
Switches the active function among TAPE, TUNER, AUX
(VIDEO or TV) and CD.
# VOLUME +,- (9)
Setting the clock
1 In stop mode, hold down SHIFT and press CLOCK
on the remote.
Go to step 3 when the hour of the clock display flashes.
2 Within 6 seconds, press ENTER.
ENTER
The hour flashes in the display.
m ,M
3 Press f or g to set the hour , then press
ENTER.
4 Press f or g to set the minute.
Each press changes the time in 1-minute steps.
5 Press ENTER.
The time display stops flashing and the clock starts from
00 seconds.
To display the time while the power is on
Hold down SHIFT and press CLOCK on the remote.
The time will be displayed for 6 seconds.
If " " appears when the unit is turned off
- -:- -
There has been a power interruption. Reset the clock.
CX-LMN5
5