Basic Features - JVC GR-AX910U Instructions Manual

RECORDING

Basic Features

Zoom-in
W W
T T
Zoom-out
Zoom indicator bar
W
T
Power zoom lever
FEATURE:
PURPOSE:
W W
OPERATION:
T T
NOTES:
Zoom level
indicator
FEATURE:
PURPOSE:
OPERATION:
NOTE:
Zooming
To produce the zoom in/out effect, or
an instantaneous change in image
magnification.
28X Hyper zoom
Digital circuitry doubles the
maximum 14x magnification offered
by optical zoom.
1) To zoom in, slide the Zoom Lever
toward "T".
2) To zoom out, slide toward "W".
During Hyper Zoom, the speed
increases the further you slide the
Zoom Lever.
Focusing may be come unstable
during Hyper Zoom. In this case,
set the zoom while in Record –
Standby, set manual focus or Focus
Lock ( pg. 24, 25), then zoom in
or out in Record mode.
The Zoom Level Indicator ( 5 ) only
moves during optical zoom. Once
the indicator reaches "T", all
magnification from that point is
through digital processing.
During digital image processing,
the quality of the image may suffer.
Quick Review
To check the end of the last
recording.
1) Press " " and release quickly
during the Record–Standby mode.
• Tape is rewound for about 2
seconds and played back
automati-cally, then pauses in
Record–Standby mode for the
next shot.
Distortion may occur at start of
playback.
This is normal.
17