JVC GR-AX910U Instructions Manual page 43

ORIGINAL TAPE (camcorder)
1 3
IN OUT IN OUT
EDITED TAPE (VCR)
AUTOMATIC EDITING TO VCR
2
IN OUT
1
2
EDIT STOP
3
NOTES:
If you performed step 1
("MAKE CONNECTIONS"), keep the remote control
pointed at the VCR during editing.
The on-screen display only appears while the
camcorder searches for each scene.
There may be noise at in- or out-points on the edited
tape with certain VCRs.
ENGAGE VCR'S RECORD–PAUSE
MODE
Point the remote control toward the VCR's infrared
sensor and press VCR REC STBY, or manually
engage the VCR's Record-Pause mode.
BEGIN AUTOMATIC EDITING
Press EDIT on the camcorder, and the previously
selected scenes are copied to the VCR in the
specified order.
END AUTOMATIC EDITING
When all selected scenes have been copied, the
camcorder and VCR enter the still or pause mode.
Press STOP on both units.
•When finished editing, be sure to disconnect the
editing cable and the audio/video cable.
on page 41
C
43