Program Ae With Special Effects - JVC GR-AX910U Instructions Manual

26
Shooting Mode Selector
FAR
+
EFFECT/PROG.AE
NEAR
–
OFF
1 Cinema
2 Sepia
3 Twilight
4 Sports
5 HI.S 1/2000
Effect menu
EFFECT/PROG. AE indicator
RECORDING
Advanced Features (cont.)

Program AE With Special Effects

Useful in making the picture look creative and attractive.
Effects can be selected during recording, as well as in
Record–Standby.
SELECT SHOOTING MODE
1
Set the Shooting Mode selector to either "FULL
AUTO" or "PRESET".
If you set to "FULL AUTO", . . .
.... only the Cinema mode can be activated.
If you set to "PRESET", . . .
.... you can choose any one of the 5 effects
available.
SELECT EFFECT
2
If you set to "FULL AUTO", . . .
.... pressing EFFECT/PROG.AE turns the Cinema
mode on and off.
If you set to "PRESET", . . .
.... pressing EFFECT/PROG.AE brings up the Effect
menu. Press again to move the highlight bar to
the desired effect. Once you decide on an
effect, it is selected and activated, and its
indicator appears, within 2 seconds.
•If you started this procedure in the Record–
Standby mode, press RECORDING START/STOP
to begin recording at this point.
DEACTIVATE EFFECT
3
When the Shooting Mode Selector is set to "FULL
AUTO", . . .
.... press EFFECT/PROG.AE.
When set to "PRESET", . . .
.... press EFFECT/PROG.AE to bring up the Effect
Menu, and press again to move the highlight bar
to "OFF".