General Usage Guidelines - Therabody POWERDOT M2 Instruction Manual

blinking.
Deactivation from the PowerDot App is
performed from the My Devices screen:
when your active PowerDot device is on,
deactivate it by tapping on the cross icon
in the top right corner.
Upon successful deactivation, the power
indicator will blink several times.
Forgot to deactivate your
device from the PowerDot App?
Deactivate manually by turning
off your PowerDot and then
holding down the Multifunction
Button on the device for 3
seconds!
GENERAL USAGE
GUIDELINES
PAD PLACEMENTS
When using doctor prescribed
stimulation programs, discuss
the best pad placement positions
as well as best positions to
maintain during stimulation with
your doctor and/or follow his/
her advice and instructions with
that regard.
When running a non-prescribed
NMES or Pain Relief TENS sessions,
ALWAYS follow pad placement
guidelines from PowerDot App
or this manual. The manufacturer
disclaims all responsibility
injuries, damages and other
consequences arising from
the stimulations where pad
placement recommendations
were not followed exactly.
ADJUSTING STIMULATION
INTENSITIES
For TENS programs or less demanding
NMES programs, you are generally required
to progressively increase the stimulation
intensities until you see muscle twitches or
feel a comfortable sensation.
For the majority of NMES stimulation
programs, the efficacy of the treatment can
be proportional to the maximum number of
fibers being recruited; therefore, it is often
required to adjust your stimulation intensity
to the maximum level you can comfortably
endure.
Keep in mind that maximum intensity levels
14