Table of Contents
Advertisement
Stimulation Channel-level Intensities
Lock
and Device-level Intensities Lock
controls
synchronize intensity changes
either a) between two stimulation channels
of PowerDot PD-01M2 device; b) between
PowerDot PD-01M2 devices (this setting
applies to two-device Duo stimulation mode
only).
Both controls are enabled by default and
can be used to fine-tune the intensity of your
current stimulation session. However, it's
best to use them only when you really need
them (e.g. ,for a better balance between your
left and right sides, when your muscles are
not evenly developed).
Use Stop (
), Pause (
controls to control your stimulation session.
I f yo u e x p e r i e n c e m a j o r
discomfort or pain – PAUSE
your stimulation session and/
or DECREASE intensities. For
your safety, after a PAUSE, your
stimulation session will resume
at only 80% of your previous
intensity values.
TERMINATING STIMULATION
It's important to know the quick ways to
end your stimulation when something
unexpected happens (e.g., one of the pads
gets detached; the stimulation area gets
wet, etc.).
There are 3 primary means of immediately
terminating a session:
1.
2.
3.
PowerDot PD-01M2 carry case is specifically
designed for carrying and storing up to 2
), Resume (
)
PowerDot devices, their lead cables and
electrode pads.
To keep electrode pads clean and make them
last longer, always re-attach them to the
safety film in between use, and store them
in your carrying case pocket. You can use
both sides of a single safety film to attach
one set of PowerDot electrode pads (one
side for the rectangular pad and the other
for the two round pads).
PowerDots can be deactivated and unpaired
from a mobile phone either from within the
PowerDot App or by manually resetting the
PowerDot device.
For manual deactivation: when PowerDot is
OFF, press and hold Multi-function button for
3 seconds until you see the power indicator
13
The recommended/most commonly
used option: Tap Pause ( ) or Stop
( ) on the Stimulation Dashboard.
OR: press the Multifunctional
Button on your PowerDot (or on any
PowerDot when in Duo mode).
OR: quickly unplug the lead cable
from PowerDot.
CARRYING & STORING
POWERDOT
DEACTIVATING POWERDOT
Advertisement
Table of Contents
