ADC PG-PLUS PLL-724 Manual page 45

Table of Contents

SCP-PLL724-010-04H

Performing an SDT on one of the POTS or ISDN channel interrupts service on the line under test. The

remaining lines on the PG-Plus system remains in service.

Upon tests completion the SDT Results screen displays Subscriber Test, Failure Condition, and Test Status.

Tests are performed in the order of display. If a test fails, the remaining tests are not performed (as per

TR-909). It takes approximately seven to eight seconds for all tests to complete.

If you selected the POTS option, the following screen displays:

If you selected the ISDN option, the following screen displays:

Press

to move up a menu level, or

ESC

PLL-724 List 1

to return to the PAU/PMU Main menu.

CTRL

January 6, 2003

Test Submenu

Table of Contents