Honda GX120K1 Manual page 8

GX120K1•GX160K1•GX200
Model
Type
Total displacement
Bore and stroke
*3
Net power
Maximum net torque *3
Compression ratio
Fuel consumption
Cooling system
Ignition system
Ignition timing
Spark plug
Carburetor
Air cleaner
Governor
Lubricating system
Engine oil capacity
Starting system
Stopping system
Fuel used
Fuel tank capacity
Reduction oil
1/2 reduction
capacity
1/2 reduction
1/6 reduction
Clutch type 1/2 reduction
Clutch engagement 1/2 reduction
P.T.O. shaft rotation
*1: NIPPONDENSO CO., LTD.
*2: With centrifugal clutch
*3: The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine
model and measured in accordance with SAE J1349 at 3,600 rpm (Net power) and at 2,500 rpm (Max. net torque). Mass
production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending
on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and
other variables.
gx120k1_gx160k1_gx200
4-stroke, overhead valve, single cylinder, inclined by 25°
BPR6ES (NGK), W20EPR-U (DENSO
Regular gasoline (86 pump octane: unleaded preferred)
*2
GX200
3
196 cm (12.0 cu in)
68 x 45 mm (2.7 x 2.1 in)
4.1 kW (5.5 HP)/3,600 min-1(rpm)
12.4 N•m (9.1 ft•lb)/2,500 min-1(rpm)
8.5: 1
1.7 L/h (0.45 gal) /3,600 min-1 (rpm)
Forced-air
Transistorized magneto ignition
20° B.T.D.C. (Fixed)
Horizontal type, butterfly valve
Dual element type
Semi-dry type
Oil bath type
Cyclone type
Centrifugal mechanical governor
Splash
0.6 L (20.2 oz.)
Recoil or electric starter
Ignition primary circuit ground
3.1 L/h (0.82 US gal)
0.5 L (17 oz.)
Lubricated from engine crankcase
0.15 L (5 oz.)
Wet, multi-plate, centrifugal
1,800 rpm
Counterclockwise (from P.T.O. side)
SPECIFICATIONS
*1 )
1-3