GX120K1•GX160K1•GX200
2. OIL ALERT UNIT
Connect a battery (1.5 to 6V) to the Oil Alert unit leads, as
shown.The Oil Alert lamp should light.Replace the alert unit if
the lamp does not light.
Black/Red lead to battery (+)
Yellow lead to battery(-)
CAUTION
•
Never use a battery of more than 6V; it may burn out the
light.
3. RECTIFIER
Check continuity between the terminals. There should be
continuity in one direction only. Replace the rectifier if there is
continuity in both directions or in neither direction.
4. CIRCUIT BREAKER
Check continuity between the two terminals.There should be
continuity in the ON position (button in) and no continuity in the
OFF position (button out). Replace the circuit breaker if the
correct continuity is not obtained.
gx120k1_gx160k1_gx200
RECOIL STARTER/FAN COVER
5-9