JBL BASSPRO Owner's Manual
  1. Manuals
  2. Brands
  3. JBL Manuals
  4. Subwoofer
  5. BASSPRO
  6. Owner's manual

JBL BASSPRO Owner's Manual

Powered subwoofer system
Hide thumbs Also See for BASSPRO:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Owner's Manual
THANK YOU
for choosing the JBL BassPro.
BassPro has been designed to deliver
great bass performance from a compact,
easily installed powered subwoofer
enclosure.
To get the best performance from your
BassPro, we strongly recommend that
installation be entrusted to a qualified
professional. Although these instructions
explain how to install BassPro in a
general sense, they do not show specific
installation methods that may be required
for your particular vehicle.
If you do not have the necessary tools
or experience, do not attempt the
installation yourself. Instead, please
ask your authorized JBL car audio
dealer about professional
installation.
In order that we may better serve
you should you require warranty
service, please retain your
original sales receipt and register your
BassPro online at www.jbl.com.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BASSPRO and is the answer not in the manual?

Questions and answers

Related Manuals for JBL BASSPRO

Summary of Contents for JBL BASSPRO

  • Page 1 To get the best performance from your BassPro, we strongly recommend that installation be entrusted to a qualified professional. Although these instructions explain how to install BassPro in a general sense, they do not show specific installation methods that may be required for your particular vehicle.

  • Page 2: Installation

    • When making electrical connections, make sure they are secure and properly insulated. • If BassPro’s fuse must be replaced, be sure to use the same type of fuse and current rating as that of the original. Figure 1.

  • Page 3: Installing The Remote

    Route the cable behind the dash or other interior panels and under the carpet. Do not route the cable outside the vehicle. Connect the RJ11 cable between the RJ11 receptacle on the BassPro and the receptacle on the Subwoofer Level Control (Figure 6). Socket Control Cable...

  • Page 4: Power Connections

    Source Unit Route all power wires through a The remote (REM) connection requires a +5 to +12 Vdc signal for BassPro grommet in the vehicle’s firewall. If a to turn on when using the line-level factory grommet is not available, install connections.
  • Page 5 APPLICATIONS BassPro is equipped with two line-level (RCA) inputs and two high-level inputs. To help you plan the installation of BassPro, we have included two system application diagrams in Figures 8 and 9. For more installation Left Speaker suggestions, contact your local authorized JBL car audio dealer.

  • Page 6: Controls And Functions

    Crossover Remote Bass Control Auto Turn-On POWER LED: This indicator AUTO TURN-ON: For speaker- will glow red when the BassPro is level connections, used this switch to operating. activate (or deactivate) BassPro’s automatic turn-on circuit. For most GAIN CONTROL: Use this...

  • Page 7: Troubleshooting

    1. Inputs are not connected. Check connections. 2. Head-unit fader controls are not set properly. Adjust head-unit controls to feed audio signals to BassPro. 3. Incorrect GAIN control setting. Output sounds muddy or distorted. 1. GAIN is set too high.

  • Page 8: Specifications

    International Chateau-du-Loir, France 3/03 JBL Consumer Products 250 Crossways Park Drive, Woodbury, NY 11797 USA 1.800.336.4JBL (4525) • FAX 1.516.682.3523 • www.jbl.com © 2003 Harman International Industries, Incorporated JBL is a registered trademark of Harman International Industries, Incorporated. Part No. BASSPROOM3/03...

Table of Contents