promethean ActivPanel Quick Start Manual page 18

This equipment is a Class B product.
United States of America
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Do not make any changes or modifications to the equipment.
Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Europe
Promethean hereby declare that the equipment is in compliance with the Low Voltage Directive 2014/35/EU and the
Electromagnetic Compatibility Directive 2014/30/EU.
Full EU Declaration of Conformities can be found by searching for the model name at
This equipment is a Class B product.
Waste Electrical and Electronic Equipment (WEEE)
For more information concerning the correct disposal of these products, please contact your Promethean reseller.
ENERGY STAR compliance
Signage Displays with a plug-in module
As an ENERGY STAR Partner, Promethean Limited has followed the EPA's enhanced product
qualification and certification process to ensure that the products marked with the ENERGY STAR logo
are ENERGY STAR qualified per the applicable ENERGY STAR guidelines for energy efficiency. The
logo appears on the pen tray near the front connections on all ENERGY STAR qualified Signage
Displays.
The ENERGY STAR program for Signage Displays was created by EPA to promote energy efficiency and reduce air pollution
through more energy-efficient equipment in offices, classrooms and factories. One way that a product can achieve this goal is by
using a power management feature to reduce power consumption when the product is not in use.
For AP7-U65-02, AP7-U75-02 and AP7-U86-02, sleep mode can be initiated in a couple of different ways. Users can take the
action of pressing the power button on the panel for 3 seconds, or a remote command can be sent via RS232. The panel will also
go into sleep mode without user action after 3 hours of inactivity.
18
support.prometheanworld.com
ActivPanel Nickel Quick Install Guide