Table of Contents
Advertisement
Quick Links
Stock #
7620
© Blonder Tongue Labs, Inc.
All Rights Reserved. Specifications subject to change without notice. All trademarks are property of their respective owners.
Model Name
Description
FTTB-1218-1W
One-Way Indoor Optical Node; 1218 MHz
ISO 9001:2015 Certified
FTTB-1218-1W
FTTB-1218-1W
P/N: 651248300A | Rev: 090519
Advertisement
Table of Contents
Related Manuals for Blonder tongue FTTB-1218-1W
Summary of Contents for Blonder tongue FTTB-1218-1W
- Page 1 Model Name Description 7620 FTTB-1218-1W One-Way Indoor Optical Node; 1218 MHz P/N: 651248300A | Rev: 090519 © Blonder Tongue Labs, Inc. ISO 9001:2015 Certified All Rights Reserved. Specifications subject to change without notice. All trademarks are property of their respective owners.
- Page 2 A Return Material Authorization (RMA) Number is required on all products returned to Blonder Tongue, regardless if the product is being returned for repair or credit. Before returning product, please contact the Blonder Tongue Service Department at 1-800-523-6049, Ext. 4256 or visit our website: www.blondertongue.com...
-
Page 3: Section 1 - General & Safety Instructions
This WILL cause permanent, irreversible burn on your retina. ALWAYS double check that power is disconnected before using such devices. If possible, completely disconnect the unit from any power source. If you have questions about laser safety procedures, please call Blonder Tongue before powering your product. -
Page 4: Section 2 - Product Summary
54-1218 MHz. The FTTB-1218-1W node has one optical input, one RF output, one -20 dB RF test port, and one 12 VDC power socket. Optical input status of the node can be easily verified by the tri-color LED indicator. -
Page 5: Section 3 - Installation & Power-Up
FTTB-1218-1W User Manual 2.2 Specifications Optical and RF Performance General Input Optical Wavelength: 1210 ~ 1650 nm Connectors SC/APC; Single Mode 1x Optical Receiver Input Optical Input Connector: Fiber Port: Optical Return Loss: 50 dB RF Port: 1x F-Female -8 ~ +2 dBm... -
Page 6: Installation
The FTTB-1218-1W should not be installed in areas that are accessible to children. The FTTB-1218-1W may be installed and operated in any position on a flat surface. The unit has two mounting holes to accommodate either wood screws (#4 or #6 pan-head) or 6-32 pan-head machine screws for tapped mounting holes. -
Page 7: Section 6 - Cleaning And Maintenance
FTTB-1218-1W User Manual Section 6 – Cleaning and Maintenance 6.1 Cleaning the Unit(s) If the unit needs to be cleaned, avoid the use of all solvents and use low-pressure clean air to remove loose dirt and to clear the connectors of any debris. Dirty or scratched connector end faces will greatly reduce the unit’s performance. Foam- tipped swabs may be saturated with denatured alcohol and inserted into the optical port for cleaning. -
Page 8: Limited Warranty
Limited Warranty Blonder Tongue Laboratories, Inc. (BT) will at its sole option, either repair or replace (with a new or factory reconditioned product, Seller will at its sole option, either repair or replace (with a new or factory reconditioned product, as Seller may determin e) any product manufactured or sold (or in...
Need help?
Do you have a question about the FTTB-1218-1W and is the answer not in the manual?
Questions and answers