Next steps
1. Install the
base
cover.
2. Follow the procedure in
System board
Removing the system board
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
memory
module.
4. Remove the
M.2 2230 solid-state drive
5. Remove the
wireless
card.
6. Remove the heatsink.
About this task
The following image(s) indicate the location of the system board and provides a visual representation of the removal procedure.
1. Display-cable connector
2. Power-cable connector
3. Keyboard backlight-cable connector
4. Keyboard-cable connector
5. Touchpad-cable connector
6. Battery-cable connector
7. Speaker-cable connector
8. System fan-cable connector
9. SSD-1 slot connector
46
Removing and installing components
After working inside your
Before working inside your
or
M.2 2280 solid-state
computer.
computer.
drive, whichever is applicable.