Installing The Heatsink - Dell Inspiron 16 5625 Service Manual

Installing the heatsink

Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
NOTE: If either the system board or the heat sink is replaced, use the thermal grease provided in the kit to ensure that
thermal conductivity is achieved.
NOTE: The number of screws on the heat sink varies depending on the graphic card configuration ordered.
The following image(s) indicate the location of the heatsink and provides a visual representation of the installation procedure.
NOTE: This is the heatsink for your computer that supports the discrete Graphics Processing Unit (GPU).
36 Removing and installing components