Heatstore HSDS Quick Start Manual

HSDS
Quick Start Guide
Please refer to the operating instructions for further information.
OVERHEATING WARNING
WARNING - In order to avoid
overheating, do not cover or obstruct
the heater.
Do not place material or garments on
the heater, or obstruct the air circulation
around the heater, for instance by
curtains or furniture, as this could cause
overheating and a fi re risk.
NEVER cover or obstruct in any way the
heat outlet slots at the top of the heater
or the air outlet slots in the base of the
heater.
Do not place objects within 300mm of the
front of the heater and 150mm either side.
• The outer case of the heater will be cooler to touch than a conventional storage heater. This
is because less heat is 'lost' through the case, making more heat available from the fan
outlet when needed.
• Nothing may be placed in the 300mm (1 foot) in front of the heater
at any time. This is to avoid items coming into contact with the
grilles and the heated air which leaves it. Blocking some or all of
this area could represent a fi re hazard.
• You do not need to decide how much heat to store. Simply set the timer mode and the
temperature to what suits you and leave the heater to meet your requirements.
• Ensure that both supply switches next to the heater are turned on. During the summer
when no heat is required, both wall switches can be turned off. Remember to turn both of
these back on in Autumn when heat is required again.
Storage Heater
This guide is for quick reference only.
08/80281/0-4 ISSUE: 4 Series: A
250 mm
300 mm