Parts Of The Pitchblack Xs; Connections - Korg Pitchblack XS Owner's Manual

Parts of the Pitchblack XS

AC adapter (9V,
600 mA or greater,
sold separately)
E ect pedal,
guitar amp,
or mixer etc.
Tuning guide LEDs

Connections

Turn off the power of all devices before you make any connections to avoid
damaging your equipment.
The INPUT and BYPASS jacks are mono. Stereo (TRS) cables will not work.
DC 9 V IN jack
Connect a separately sold AC adapter (9 V,
other than what Korg recommends may cause a malfunction or damage.
INPUT jack
Connect a cable from your instrument to the INPUT jack of the tuner. The power
turns on when you connect a cable to the INPUT jack, and the reference pitch
setting blinks in the note name display for several seconds. Connecting a cable to
the INPUT jack will turn the power on, but the tuner will not be in tuner mode.
Press the TUNER ON/OFF switch to engage tuner mode.
BYPASS jack
Connect a cable from the BYPASS jack to your other effect pedals or amp.
When the tuner is switched on, the signal from the INPUT jack will be muted for
silent tuning.
Signal is output from this jack while the tuner is off.
TUNER ON/OFF switch
DC 9V IN jack
,
BYPASS jack
(mono)
DISPLAY/BRIGHT button
CALIB button
BUFFERED/TRUE BYPASS switch
Tuning LED
meter
INPUT jack
(mono)
Note name display
) here. Using an AC adapter
3
Guitar, etc.