Telycam 20X NDI User Manual
  1. Manuals
  2. Brands
  3. Telycam Manuals
  4. Security Camera
  5. 20X NDI
  6. User manual

Telycam 20X NDI User Manual

Ptz video camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TLC-300-IP-20-FNDI
20X NDI
PTZ Video Camera
®
User Manual
V1.0
（
）
English
J.BC.0205.0178

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 20X NDI and is the answer not in the manual?

Questions and answers

Related Manuals for Telycam 20X NDI

Summary of Contents for Telycam 20X NDI

  • Page 1 TLC-300-IP-20-FNDI 20X NDI PTZ Video Camera ® User Manual V1.0 （ ） English J.BC.0205.0178...

  • Page 3: Table Of Contents

    ® CONTENTS CONTENT ...............................1 SAFETY GUIDES ............................2 PACKING LIST ..............................3 QUICK START ............................... 3 PRODUCT HIGHLIGHTS..........................4 CAMERA SPEC ..............................4 CAMERA INTERFACE..........................6 CAMERA DIMENSION..........................6 IR REMOTE CONTROLLER........................7 VISCA IN (RS232 PORT)..........................9 VISCA PROTOCOL .............................10 PELCO-D PROTOCOL ..........................18 PELCO-P PROTOCOL ..........................

  • Page 4: Safety Guides

    ® SAFETY GUIDES 1. Before operation, please fully read and follow all instructions in the manual. For your safety, always keep this manual with the camera. 2. The camera power input range is 100-240V~AC(50-60Hz),ensure the power supply input within this rate before powering on.

  • Page 5: Packing List

    ® PACKING LIST Check all bellow items when open the package: Camera········································································ 1 Power Adapter································································ 1 Power Cable·································································· 1 RS232 Control Cable························································ 1 USB Type-C Cable·························································· 1 Remote Controller··························································· 1 User Manual·································································· 1 Double-sided Adhesive······················································1 QC certification······························································ 1 QUICK START 1.Check all cable connections before power on.

  • Page 6: Product Highlights

    ® Dial Switch Dial Switch SW-3 SW-4 Instruction SW-5 SW-6 Instruction Undefined Undefined Undefined Working mode Undefined Undefined Undefined Undefined PRODUCT HIGHLIGHTS  Equipped with the cutting-edge image processing solution, 1/2.8 inch 2.4MP sensor, providing 1080P60 full HD video resolution. ...
  • Page 7 ® YUY2： 1920*1080P6; 1280*960P10; 1280*720P13; 1024*768P16; 800*600P25; 640*480P30; 640*480P30 MJPG： 1920*1080P30; 1280*960P30; Type-C 1280*720P30; 1024*768P30; 800*600P30; 640*480P30; 640*480P30 1920*1080P60/59.94/50/30/29.97/25/24/23.98 ® 1920*1080I60/59.94/50 1280*720P60/59.94/50/30/29.97/25 Video Interface HDMI, SDI, USB Type-C, NDI ® Audio Interface Line-in Control Port RS232, RS485, NDI (VISCA over IP), USB Type-C(UVC1.1) ®...

  • Page 8: Camera Interface

    ® CAMERA INTERFACE 1. Camera Lens 6. Tripod Screw Hole 11. USB Type-C port 2. Camera Base 7. Installation Hole 12. HDMI port 3. IR Receiver Panel 8. RS232 control port (input) 13. SDI port 4. Power Indicator Light 9. RS232 control port(output) 14.

  • Page 9: Ir Remote Controller

    ® IR REMOTE CONTROLLER POWER Under normal working mode, short press POWER key, to enter standby mode; Press it again, the camera will start configuration. and go back to HOME position. It will go to preset position if power on model has been set before. FREEZE Short press FREEZE key to freeze/ unfreeze the image.
  • Page 10 ® FOCUS KEY ( ON THE LEFT) Manual focus, only valid under manual focus model. ZOOM KEY( ON THE RIGHT SIDE) Set the zoom in or zoom out. NAVIGATE KEY: UP/DOWN/LEFT/RIGHT Under working mode, use navigate key to set the pan tilt, and select menu when enter OSD. OK /HOME KEY Under working mode, short press OK to make the camera go back to HOME position;...

  • Page 11: Visca In (Rs232 Port)

    ® VISCA IN (RS232 PORT VISCA V_IN V_OUT RS485 A(+) IR OUT B(-) VISCA IN &Mini DIN Connection VISCA IN & DB9 Connection Camera VISCA IN Camera VISCA IN Windows DB-9 Mini DIN A(+) A(+) IR OUT IR OUT B(-) B(-) VISCA Network Construction: SERIAL PORT CONFIGURATION...

  • Page 12: Visca Protocol

    ® VISCA PROTOCOL Part1 Camera Return Command Ack/Completion Message Command Packet Note z0 41 FF Returned when the command is accepted. Completion z0 51 FF Returned when the command has been executed. z = camera address+8 Error Messages Command Packet Note Returned when the command format is different or when a command Syntax Error...
  • Page 13 ® Command type function command Direct 8x 01 04 46 0p 0q 0r 0s FF Enable In separate mode Stop 8x 01 04 08 00 FF Far(Standard) 8x 01 04 08 02 FF Near(Standard) 8x 01 04 08 03 FF Far (Variable) 8x 01 04 08 2p FF p=0 (Low) to 7 (High)
  • Page 14 ® Command type function command Reset 8x 01 04 0A 00 FF 8x 01 04 0A 02 FF Shutter Setting CAM_Shutter Down 8x 01 04 0A 03 FF pq: Shutter Position Direct 8x 01 04 4A 00 00 0p 0q FF (0~0x15) Reset 8x 01 04 0B 00 FF...
  • Page 15 ® Command type function command 8x 01 06 A5 03 FF pq:saturation level CAM_Saturation Saturation 8x 01 04 A1 00 00 0p 0q FF 0x00~0x0f pq:Contrast level CAM_Contrast Contrast 8x 01 04 A2 00 00 0p 0q FF 0x00~0x0f 8x 01 06 A0 02 FF CAM_Speed By Zoom 8x 01 06 A0 03 FF...
  • Page 16 ® Command type function command 1080I50 0x04 1080P30 0x06 1080P25 0x08 720P60 0x09 720P50 0x0c 720P30 0x0e 720P25 0x11 1080P5994 0x13 1080I5994 0x02 1080P2997 0x07 720P5994 0x0a 720P2997 0x0f 1080P24 0x2a 1080P2398 0x2b pqrs: Camera ID (=0000 to CAM_ID Write 8x 01 04 22 0p 0q 0r 0s FF FFFF) DHCP off...
  • Page 17 ® Command type function command Down Right 8x 01 06 01 VV WW 02 02 FF Stop 8x 01 06 01 VV WW 03 03 FF Absolute 8x 01 06 02 VV WW Position 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF Relative 8x 01 06 03 VV WW Position...
  • Page 18 ® y0 50 0A FF Shutter priority y0 50 0B FF Iris priority y0 50 0D FF Bright p 0: OFF CAM_Flicker Mode Inq 8x 09 04 AA FF y0 50 0p FF 1: 50HZ 2: 60HZ CAM_Shutter Pos Inq 8x 09 04 4A FF y0 50 00 00 0p 0q FF pq: Shutter Position...
  • Page 19 ® VISCA PAN TILT ABSOLUTE POSITION VALUE Pan Angle VISCA Value Tilt Angle VISCA Value -170 0xF670 0xFE50 -135 0xF868 0x0000 0xFAF0 0x01B0 0xFD78 0x0360 0x0000 0x510 0x0288 0x0510 0x0798 0x0990 VISCA PAN TILT SPEED VALUE Pan(Degree/Second) Pan(Degree/Second)) — 17 —...

  • Page 20: Pelco-D Protocol

    ® PELCO-D Protocol Command List Function Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 0xFF Address 0x00 0x08 Pan Speed Tilt Speed Down 0xFF Address 0x00 0x10 Pan Speed Tilt Speed Left 0xFF Address 0x00 0x04 Pan Speed Tilt Speed Right 0xFF Address 0x00...

  • Page 21: Pelco-P Protocol

    ® PELCO-P Protocol Command List Function Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Byte8 Tilt 0Xa0 Address 0x00 0x08 Pan Speed 0Xaf Speed Tilt Down 0Xa0 Address 0x00 0x10 Pan Speed 0Xaf Speed Tilt Left 0Xa0 Address 0x00 0x04 Pan Speed 0Xaf Speed Tilt...

  • Page 22: Osd Menu

    ® OSD MENU 1. Under working mode, press the "MENU" key on the IR remote controller, to enter the OSD menu as bellow: 2. After enter the main menu, use the navigate "UP/DOWN" key to select the main menu. Once been selected, the main menu will change to blue background, and the right side will show all sub menu options.
  • Page 23 ® Bright setting: 0~27, only valid under BRIGHT priority EBRIGHT Default: AUTO mode. BRIGHT 0~15 Default: 8 WD MODE ON/OFF Default: OFF WD LEVEL WDR Level: 1~6 Default: 1 ON/OFF Default: OFF Optional：ATW, MANUAL, C.T., AUTO, INDOOR, OUTDOOR, WB MODE Default: ATW PUSH Red GAIN...
  • Page 24 ® PT SPD Pan Tilt speed Default: 18 ZOOM SPD Zoom speed Default: 5 PRE FRZ Open/Close Video Freeze when running presets Default: OFF PRE PTSPD Preset head speed: 2~24 Default: 15 PRE ZSPD Preset zoom speed: 1~7 Default: 5 1080P59.94 1080P50 1080I59.94...

  • Page 25: Set Ip Address In Menu

    ® Set IP Address in Menu In order to facilitate customer debugging, the camera has the support menu to set IP address. The specific methods are as follows: 1. Press "MENU" to open the menu interface, select "IP SETTINGS" in the menu to call up the IP setting interface: 2.

  • Page 26: Uvc Control

    ® UVC CONTROL 1. Only run the client software after the USB3.0 camera has completed self-configuration (the IR indicator in blue color and will not flash); otherwise may cause black video issue. 2. Make sure the USB3.0 camera is recognized by the PC Device Manager. 3.

  • Page 27: Web Setting

    ® WEB SETTING After logging in, you can PTZF Control and Settings parameters for the camera on the web interface. To preview the image screen, you need to download Kiloview Multiview. The web interface supports Chrome, Firefox, IE, Safari, Opera and other browsers and is very adaptable.
  • Page 28 ® On the right side you can control the camera zoom, focus, preset position control and other pan, tilt, functions, and you can set the speed of the , focus and zoom pan/tilt speed speed speed 3.Setting " " Click Setting to enter into parameter setting interface as following: The "NDI Settings"...
  • Page 29 ® The "Audio Settings" tab allows you to set the audio volume. As shown in the figure below: The "Image Adjust" tab contains pages for setting parameters such as focus, exposure, balance, image, image setting, and noise reduction. The following figure shows: The "Focus"...
  • Page 30 ® The "Exposure" tab contains parameters such as exposure mode, shutter, gain, iris, brightness, anti-flicker. The "Balance" tab contains parameters such as white balance mode, red gain, blue gain, and color temperature. The "Image" tab contains parameters such as Mirror, Flip, Backlight Compensation, Gamma, Wide Dynamic Range.
  • Page 31 ® The "Image Settings" tab contains parameters such as Brightness, Sharpness, Contrast, Saturation. The "Noise Reduction" tab contains 2D/3D noise reduction settings. 2D noise reduction has two options: on/off, and 3D noise reduction has 6 options: off/auto/1~4. The "Ethernet" tab contains DHCP mode, IP address, Netmask, Gateway, DNS, HTTP port, HTTPS port, VISCA Over IP port.
  • Page 32 ® The "Firmware Upgrade" tab allows you to view the camera device number, serial number, ISP version, FPGA version, ARM version. In this interface, you can upgrade the camera program. The upgrade method is shown below, click the "Select a file" icon in the tab, open the session box, select the upgrade file and open it, then click "Upgrade"...
  • Page 33 ® Reboot: Reboot camera. "Account Setting": is used for setting camera account and password. Input the account firstly, then input same password twice, click set to finish. Please remember account and password, otherwise you may be not able to login. —...

  • Page 34: Ndi Tools Guide

    ® NDI Tools Guide 1. Image Preview https://ndi.tv/tools/ A. Download the NDI Tools via and install it. B. Find out the NDI Tools/Studio Monitor via Windows toolbars, and then open it, as bellow: C. Right click on the Studio Monitor screen, select the preview device: 2.
  • Page 35 ® Refer to above picture, once open the video via Studio Monitor, there will show up a setting icon at the lower right corner, single click this iron to enter WEB UI. 4. How to use NDI tools to Virtual Input CAMERA A.

  • Page 36: Visca Over Ip

    ® VISCA OVER IP VISCA over IP means VISCA protocol transmit via IP, to reduce RS232/RS485 cable layout (the controller must support IP communication function) Communication port spec: Control port: RJ45 Gigabit LAN  IP protocol: IPv4  Transmit protocol: UDP ...
  • Page 37 ® Payload type: Data definition as following: Name Value (Byte 0) Value (Byte 1) Value (Byte) VISCA command 0x01 0x00 Stores the VISCA command. VISCA inquiry 0x01 0x10 Stores the VISCA inquiry. Stores the reply for the VISCA command and VISCA VISCA reply 0x01 0x11...
  • Page 38 ® Name Value Description RESET 0x01 Resets the sequence number to 0. The value that was set as the sequence number is ignored. ERROR 0x0Fyy yy=01:Abnormality in the sequence number. yy=02:Abnormality in the message(message type). Controlled reply  The following data is saved in return command payload of control command. Message Value Description...
  • Page 39 ® Sequence chart as following Sequence chart when command Sequence chart when returned message Note: Do not set IP address, sub net mask, gateway parameter in VISCA over IP command, otherwise, it will cause network breaks off. Due to change these parameter, network will be in off status. —...
  • Page 40 Telecam Technology Co.,Ltd Add: 3F, 6F, 7F, Building A, Shuanghuan Information Technology Industrial Park, No.8, Baoqing Rd, Longgang District, Shenzhen, 518116, China Tel: +86-755-33275155 Website: Https://www.telycam.com E-mail: telycam@telycam.com...

Table of Contents