Satellite Receiver; Plug & Auto Set Up - Toshiba V631UK Owner's Manual

66 CONNECTIONS

Satellite Receiver

This VTR can be connected to your satellite receiver and you can enjoy watching or recording satellite programmes through
the VTR.
Connecting a Satellite Receiver
By means of 21-pin Scart Cable:
If both your TV and Satellite receiver have a SCART, use a SCRAT cable (not supplied) to connect the VTR.
Satellite Receiver
TV
SCART cable
SCART cable
By means of RF Coaxial Cable:
After making this connection, you must preset the station received through the satellite tuner. And proceed with the satellite
setting.
Satellite receiver
TV (Not supplied)
Aerial connector
SCART cable
10
Aerial
Aerial connector
21-Pin Scart Terminal
AV2(SATELLITE) IN
OUT
R
AUDIO
L
TV
AV1(EURO AV)
Aerial
RF IN
RF OUT
AV2(SATELLITE) IN
OUT/
R
AUDIO
TV L
AV1(EURO AV)
66 CONNECTIONS
Plug & Auto Set Up
Your VTR will automatically set itself up when it is plugged into the mains for the first time. TV stations will be stored in memory.
The process takes a few minutes. Your VTR will then be ready for use.
Plug & Auto Set Up
1 Connect the coaxial cable.
Plug the VTR into the mains. A message
2
appears "AUTO SET-UP WILL BE
STARTED. CHECK ANTENNA
AND TV CABLE CONNECTION".
Aerial Input
(from Antenna)
Remember, connect
this first
VTR
AV2(SATELLITE) IN
OUT
R
AUDIO
TV L
AV1(EURO AV)
The process will finish after a few
3
SCART
minutes. Then the date and time are
IN/OUT
set automatically from the broadcast
signal, but this function will not
Aerial Output
operate if there is no teletext signal.
(to TV)
AUTO SET-UP WILL BE
STARTED.
CHECK ANTENNA AND
TV CABLE CONNECTION
END: MENU
AUTO SET UP
PLEASE WAIT
60%
I˚˚˚˚˚˚˚˚----------I
END: MENU
NOW SETTING THE CLOCK
CLOCK
12:00 1/JAN/2001
MON
AUTO CLOCK : ON
PROCEED: OK
¥Š ›‚
END: MENU
11