Connecting To A Stereo System; Connecting To A Digital Av Receiver - Toshiba SD1010 Owner's Manual

Connecting to a Stereo System

Stereo System with Left/Right Audio In Jacks
Select one of the video connections (CVBS VIDEO
A
IN or SCART IN)
depending on the options available on your TV.
Use the audio cables (white/red) to connect AUDIO
B
OUT (L/R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the stereo system
(cable not supplied).
Helpful hint: Before making or changing any connections, make sure that all the devices are
disconnected from the power outlet.

Connecting to a Digital AV Receiver

Receiver has a PCM, Dolby Digital or MPEG
decoder
Select one of the video connections (CVBS VIDEO IN
A
or SCART IN) depending on the options available on
your TV.
Connect the COAXIAL jack of the DVD player to the
B
corresponding Digital Audio In jack on your Receiver
(cable not supplied).
Set the DVD Player' s Digital Output to PCM or All
C
depending on the capabilities of your Receiver (see
page 20 {Digital Output}).
Tip:
-If the audio format of the Digital Output does not
match the capabilities of your receiver, the receiver
will produce a strong, distorted sound or no sound at
all.
Connections