Connecting To A Digital Av Receiver; Connecting The Power Cord - Toshiba SD5300KC Owner's Manual

Connecting to a Digital AV Receiver

Receiver has a PCM, Dolby Digital or MPEG
decoder
Select one of the video connections (CVBS VIDEO
A
IN, COMPONENT VIDEO IN or HDMI IN)
depending on the options available on your TV.
Connect the COAXIAL jack of the DVD player to the
B
corresponding Digital Audio In jack on your Receiver
(cable not supplied).
Set the DVD Player' s Digital Output to PCM or All
C
depending on the capabilities of your Receiver (see
page 19 {Digital Output}).
Tip:
-If the audio format of the Digital Output does not
match the capabilities of your receiver, the receiver
will produce a strong, distorted sound or no sound at
all.
Helpful hint: Before making or changing any connections, make sure that all the devices are
disconnected from the power outlet.
Connections

Connecting the power cord

After everything is connected properly, plug in the AC
power cord to the power outlet.
Never make or change any connections with the
power switched on.