Connecting To A Digital Av Receiver; Connecting The Power Cord - Toshiba SD-290 Owner's Manual

Connections

Connecting to a Digital AV Receiver

Receiver has a PCM, Dolby Digital or MPEG
decoder
Select one of the video connections (CVBS VIDEO
A
IN, SCART IN or COMPONENT VIDEO IN)
depending on the options available on your TV.
Connect the COAXIAL jack of the DVD player to the
B
corresponding Digital Audio In jack on your Receiver
(cable not supplied).
Set the DVD Player' s Digital Output to PCM or All
C
depending on the capabilities of your Receiver (see
page 21 {Digital Output}).
Tip:
-If the audio format of the Digital Output does not
match the capabilities of your receiver, the receiver
will produce a strong, distorted sound or no sound at
all.
Helpful hint: Before making or changing any connections, make sure that all the devices are

disconnected from the power outlet.

Connecting the power cord

( Illustration of SD290EKB)
After everything is connected properly, plug in the AC
power cord to the power outlet.
Never make or change any connections with the
power switched on.