Wireless Command Center - iRobot Roomba 510 Owner's Manual

Wireless Command Center

The Wireless Command Center is compatible with Models 535 and above only.
It is included with Models 570 and above, and is otherwise available as an
accessory.
The Wireless Command Center lets
you conveniently control Roomba's
functions. You can use it to turn
Roomba on and off, schedule Roomba
to clean, and steer Roomba around
your room.
To schedule Roomba to clean, use the
buttons on the Wireless Command
Center as if they were on the robot
itself. See page 16 for details on
setting Roomba's clock and setting,
changing and deleting schedules.
TIP: When powered on, the lights on the Wireless Command Center will
sequence from Sunday to Saturday until the robot is under its control.
All Command Centers are setup to control only one Roomba. To pair a wireless
command center with a robot, first install new batteries while holding down the
left turn button, the lights will flash in a sequence from Saturday to Sunday.
Second, place the Command Center directly on top of the robot you would like
to pair it with and hold the "Day" and "Minute" buttons until the robot flashes
and beeps once. The robot and Command Center are now paired.
Before using your Wireless Command Center for
the first time, install four AA alkaline batteries.
For more detailed information, visit: www.irobot.com
Troubleshooting Indicator
Battery Indicator
19