Advantech VEGA-1100 User Manual page 28

– Multiview Mode
Click "Get Composition List" and the preset multiview mode will appear.
Users can also enter the name, resolution, and click "Create" on the left to
create a new model.
* Do not include spaces in the name.
Create: create the mode
Delete: delete the mode
Load: load the previously saved mode
Save: save the mode
– Surface and Window
Create Surface (group) and Window (screen). Next, select the surface (0 to
21) to set the window size by dragging the orange frame on the upper right,
or entering parameters (X, Y, Width, and Height). Then click "Create" to cre-
ate a new window. Multiple windows can be created in each surface, and the
same image will be applied to all windows in the same surface.
Create: create the window
Modify: save the window position and size
Delete: delete the window
– Apply Surface
After completing the settings, click the output device and the Surface to be
applied, then drag the input device to the green area on the upper right to
complete the application. Users can apply several surfaces to the output
device.
* If the input resolution is 4K60, please right-click on the Output Device ID
and select "Stop HDMI: 0".
*Total bandwidth is 10Gbps under Multiview mode (up to four
1920x1080@30 inputs). Users can adjust the FPS of the screen in the Sur-
face on the right.
11. Rename
Select device and enter the New ID. Then click "Apply" to apply the device
name. If you want to reset the ID, please select device and click the "Reset".
VEGA-1100 User Manual 20