5.
RS232
Drag the input device to output device to do input/output mapping. You can also
send text messages to the device via RS232 Routing. Alternatively, select
"Send to all devices" to send text messages to all devices at once.
* Please set the device UART configuration to the same option before sending.
6.
USB Routing
First, follow the panel descriptions section to connect the computer, mouse or
keyboard to the USB 1.0 or 2.0 ports. Select the device ID, then choose "USB
1.0" or "USB 2.0" according to the USB port type needed. If the USB port of the
device is connected to a computer, select the corresponding Device ID and click
"Local". If it is connected to a mouse or keyboard, select "Remote". After com-
pleting the settings, power cycle the device, and drag the input device to the
output device to do input/output mapping. After this, users can use the mouse or
keyboard to control the computer via USB routing.
17
VEGA-1100 User Manual