Table of Contents
Advertisement
4.1
Software Control via Ethernet Port
4.1.1
System Requirements
1.
OS information: Microsoft Windows XP/7/8/10.
2.
Software size: 5MB.
3.
Minimum RAM requirement: 256MB.
4.1.2
Start the Software Control Program
1.
Extract the Setup_VEGA_Control Tool.zip file and follow the installation wizard
to install the software.
2.
Click the VEGA.exe file from AVP Control Tool folder to start using the software,
then the blueriver_control.exe server will start automatically.
4.1.3
Control Interface
When you click the executable file, the following screen will pop up. Please click
"Refresh" to complete the device connection.
*If the device cannot be detected, try turning the firewall off.
1
HDMI
2
Display Wall
3
HDMI Audio
4
Analog Audio
Users can drag the input device to output device at the bottom of each page to
do input/output mapping.
* The selected device will be displayed in yellow.
a. Type – VID – PID (15-over Copper/16-over Fiber)
b. Output Device ID (derived from the device MAC address)
c. IP address
d. Input Device ID
e. Firmware version
Users can click the button to edit the device name.
VEGA-1100 User Manual
5
RS232
6
USB Routing
7
EDID
8
Firmware Update
14
9
Infrared
10
Multiview
Advertisement
Table of Contents
