Advantech VEGA-1100 User Manual page 23

Users can right-click on the output device to adjust advanced settings.

Reboot: reboot the device.
Factory reset: restore the device to factory settings.
Start/Stop HDMI: 0: start or stop the input video under normal mode.
Start/Stop HDMI: 1: start or stop the input video under Multiview mode.
1. HDMI
Drag the input device to output device to do input/output mapping. After setting
the mapping, you can select the device ID to set more video modes. We provide
three switching modes, including General, Genlock, and Fastswitch. Selecting
"General" will follow the previous setting, "Genlock" will bypass HDR, and
"Fastswitch" can choose from three preset resolutions. Users can also click
"Start" or "Stop" to start the video and stop the video. In addition, if you want to
disconnect the input and output of the device, click "Leave".
* The "Fastswitch" mode does not support HDR.
15 VEGA-1100 User Manual