7.4.
Backflow
Backflow rarely occurs. If this should happen, the primary reactor is most likely the cause. Your installer or septic tank
pumper can generally take care of the situation.
7.5.
Odours
Any septic system is likely to generate gas and consequently odors.
unrelated to the phosphorus removal unit (DpEC) followed or not by a watertight sand filter, can prevent proper
dispersion of septic gases and generate foul odours. If this happens, contact Premier Tech's After-Sales Service
department for available solutions.
PT Water and Environment
+1 800 632-6356
info.ptwe.na@premiertech.com
PT-WaterEnvironment.com
Owner's manual
Phosphorus removal unit (DpEC)
If you have any questions or comments,
please do not hesitate to contact Premier Tech at 1 800 632-6356.
The information contained in this document was up-to-date and consistent with the information available at the
time of publication. Premier Tech Ltd. makes no warranties or representations as to its accuracy. Because of its
continuous improvement policy, Premier Tech Ltd. and its affiliated companies reserve the right to change and/or
discontinue the manufacture of any product and/or modify technical data and prices, for any reason whatsoever
and at its sole discretion, without further notice and without liability to anyone in this regard. ECOFLO
REWATEC
TM
affiliates. Ecoflo
issued on 2019-01-11. Reference: 3685. The phosphorus removal unit (DpEC) is protected under patent
US9216918. Notice issued on 2019-01-11. Reference: 0488. For current data regarding all patent application(s)
and patent(s) for this product or any part thereof, consult the website patentmarking.premiertech.com.
© 2022 Premier Tech Ltd. All rights reserved.
The position of the air vent, as well as other factors
, PREMIER TECH
, and PREMIER TECH & DESIGN
®
is protected under patents: CA2499637; US7097768; ES2285173; EP1539325 (BE, FR). Notice
®
Page 11/14
are trademarks of Premier Tech Ltd. or its
TM
Item # 339921
®
,
20220816
Need help?
Do you have a question about the REWATEC Phosphorus removal unit and is the answer not in the manual?
Questions and answers