Advertisement
7. Installation Checkout
□
Wrap the toilet seat with plastic wrap. This will prevent water from
spraying from the toilet during testing.
□
Plug power cord into socket, Bidet seat generate one short beep,
wand extend and retract once, side panel backlight and night light
blink until initialization completion.
□
Attach the clips along the hose and power cord.
□
The seat is activated by skin-to-seat contact. To activate the seat
controls for testing purpose, when facing the toilet, place your hand
or a damp wash cloth on the right side of the seat approximately 1 /3
from the front of the seat (as illustrated).
□
Continue reference "Operation" section within user's manual to
checkout different functions.
Kohler Co.
7
1500353-KR2-A
Advertisement
