Advertisement
Washer
(Right)
Note: Align the left/right washer with mounting holes, bent side of washer
upwards.
□ Position the mounting plate over the mounting holes on the bowl.
□ Insert screw into washer separately.
Note: Some toilet base plate has already equipped with threaded insert,
no nut required for such toilet.
Toilet with threaded inserts:
□ Snap screws into mounting board and the toilet mounting holes, move
washer to snap into the mounting board groove. Pay attention to
the washer direction: bent side upwards for washer close to hole.
□ Tighten bolts slightly towards threads direction. Loosely thread a nut onto
each of the bolts for future adjustment.
For all other toilets installation:
□ Position the mounting plate over the mounting holes on the bowl.
□ Place each screw into washer, pay attention to the washer direction:
with bent side upwards for washer close to the hole.
□ Insert each bolt through the mounting plate and into the mounting holes.
□ Position the left/right mounting plate so to rest in the grooves of the
mounting plate.
□ Loosely thread a nut onto each of the bolts. Manually tighten the nuts.
1500353-KR2-A
Bolt
Washer
(Left)
Mounting Plate
4
Advertisement
