Download
Share
Print this page
Kohler REACH K-8433T-S Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Kohler Manuals
  4. Toilets
  5. REACH K-8433T-S
  6. Installation instructions manual
Kohler REACH K-8433T-S Installation Instructions Manual

Kohler REACH K-8433T-S Installation Instructions Manual

Vitreous china two-piece toilet
Hide thumbs

Advertisement

Quick Links

Download this manual
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation . This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
·
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler Co. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain important care, cleaning, and
warranty information-please leave instructions for the
consumer.
ORDERING INFORMATION
REACH 2PC Toilet ...................................................K-8433T-S
Includes Bowl .......................................................K-3836T
Includes Tank.........................................................K-8436T
Includes
REACH Quiet-Close
NOTES
·
Observe all local plumbing and building codes.
·
Shut off the water supply.
·
Seat post holes are on 140mm (5-1/2") centers.
·
51mm (2") passageway.
·
Water depth from the rim is 157mm.
·
Ensure that the new drain has the correct roughing-in
dimension.
See Fig. #1.
·
Be very careful while working with vitreous china products.
Vitreous china can break or chip if the bolts and nuts are
overtightened, or if carelessly handled.
·
Carefully inspect the new fixture for any sign of
Damage.
·
For new construction, refer to the dimensions in
Fig. #1
and
Fig. #4
for locating the shut-off valve.
·
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards A112.19.2-2008.
WARNING: Risk of external leakage.
nut has been factory-tightened to design specifications.
If re-tightening is required, wrench tighten 1/4 turn past
finger tight.
1239719-T01-A
Toilet Seat
..............K-3857T
The fill valve
VITREOUS CHINA TWO-PIECE TOILET
·
·
·
(
....................................................................K-3836T
....................................................................K-8436T
·
·
·
140mm
·
51mm
·
·
·
·
·
·
(ASME)
A112.19.2-2008
1/4
-1-
REACH
INSTALLATION INSTRUCTIONS
.................................K-8433T-S
...........................................K-3857T
157mm
1
1
4
Copyright Kohler China Ltd., 2014
K-8433T-S
-
, 2014

Advertisement

loading

Related Manuals for Kohler REACH K-8433T-S

Summary of Contents for Kohler REACH K-8433T-S

  • Page 1 · · All information in these instructions is based upon the latest product information available at the time of publication. Kohler Co. reserves the right to make changes in product characteristics, packaging, or availability at any time without notice. ·...

  • Page 2: Tools And Materials Required

    If you use a rigid connection, take care not to apply side forces to the bottom of the fill valve. Reference Value Unit: mm Front of Bowl Finished wall Supply Of Outlet Fig.#1 Kohler reserves the right to change marked dimensions without prior notice. 1239719-T01-A...

  • Page 3: Installation

    The expansion of cement due to a rise in temperature may make the toilet crack or cause damage. Kohler is not responsible for any Fig.#3 damage caused by installation with the use of cement.

  • Page 4: Install The Tank

    Carefully align lower toilet over the closet flange and bolts. Apply full body weight to toilet rim to set seal. CAUTION: Risk of external leakage. Do not lift or rock toilet after placement; A new gasket must be reapplied if you break the watertight seal. Assemble bolt cap bases, washer, and Bolt Cap* nuts on exposed T-bolts.

  • Page 5: Water Level

    Turn shut-off valve on and check for leaks. If connections are squarely assembled, a slight retightening of the nuts will stop any leaks. If toilet is leaking in between the tank and bowl, carefully retighten the tank bolts evenly. Check all bowl and tank connections for leaks for several days.

  • Page 6: Troubleshooting Chart

    Fasten the snap along "CLOSE" CLOSE direction. SCALE Fig.#11d Float adjustment instructions: Make Screw sure the height of surface E is 2-4mm G 2-4mm lower than surface G. Float Water Cup Fig.#11e TROUBLESHOOTING CHART TROUBLESHOOTING CHART SYMPTOMS PROBABLE CAUSES CORRECTIVE ACTION 1.

  • Page 7: Consumer Responsibilities

    CAUTION: Do not use any cement while installing the toilet. Heat expansion of the toilet may damage the feet of the toilet. Kohler will not be responsible for any damage because of using cement. WARNING: Risk of product damage. Do not throw into the toilet what is easy to block it, such as newspaper, paper pilch, sanitary towel.