Agilent Technologies E1439 User Manual page 177

age1439_reset
Places the module in a known state.
VXIplug&play Syntax
ViStatus age1439_reset(ViSession id);
Description
age1439_reset returns the module's internal data structures to the power-up state but does not
reset the hardware. This function can be called separately by this function, or may be selected in
conjunction with the age1439_init function.
Note
Calling this function halts any measurement or fiber transfer.
Parameters
id is the VXI instrument session pointer returned by the age1439_init function.
Comments
The reset values are listed in
This command takes about 100 ms to complete.
Return Value
AGE1439_SUCCESS indicates that a function was successful.
Values other than AGE1439_SUCCESS indicate an error condition or other important status
condition. To determine the error message, pass the return value to
page
See Also
"Commands which halt active measurements" on page
"age1439_reset_hard" on page 168
#include "age1439".h
"Default values" on page
102.
Agilent E1439 Programmer's Reference
Functions listed alphabetically
201.
"age1439_error_message" on
198, "age1439_init" on page 132,
167