Age1439_Fiber_Signal_Get - Agilent Technologies E1439 User Manual

age1439_fiber_signal_get

Returns a value indicating whether or not an optical signal is detected by the optical fiber
interface receiver.
VXIplug&play Syntax
ViStatus age1439_fiber_signal_get(ViSession id, ViPInt16 fiberSignalPtr);
Parameters
id is the VXI instrument session pointer returned by the age1439_init function.
fiberSignalPtr returns a value indicating whether or not an optical signal has been detected by the fiber interface
receiver.
AGE1439_NO_FIBER_SIGNAL
interface receiver.
AGE1439_FIBER_SIGNAL_PRESENT
interface receiver.
Return Value
AGE1439_SUCCESS indicates that a function was successful.
Values other than AGE1439_SUCCESS indicate an error condition or other important status
condition. To determine the error message, pass the return value to
page
See Also
"age1439_init" on page
page 176
#include "age1439".h
102.
132, "age1439_fiber_LED_get" on page
Agilent E1439 Programmer's Reference
indicates no optical signal has been detected by the fiber
indicates an optical signal has been detected by the fiber
Functions listed alphabetically
"age1439_error_message" on
110, "age1439_status_get" on
115