Battery Installation - EcoFlow 5KWh LFP Battery User Manual

EN
6.5 Battery Management System
The battery is equipped with a battery management system (BMS) and has the following battery
protection features:
Battery Discharging Low Voltage Protection
Battery Charging High Voltage Protection
Battery Charging/Discharging Overheat Protection
Battery Charging/Discharging Over-Current Protection
Battery Equalization Function
*When protection is triggered, disconnect the battery and leave it for some time before restarting it.
6.6 Replacing the Fuse
The EcoFlow 5KWh LFP Battery has a built-in DC 70-V/150-A replaceable fuse, while the 2KWh LFP
Battery has a built-in DC 70-V/125-A replaceable fuse. Under normal operating conditions, there is no risk
of fuse blowing. When an external short circuit occurs and the battery management system is not
protected in time, the fuse will blow immediately to protect the battery. When a short circuit occurs and
the battery cannot be charged or discharged, the fuse must be replaced. Replacement procedure is as
follows:
1. Ensure the battery is switched off, open
the fuse cover using a suitable tool, and
keep the cover in a safe place.
11
Prevents over-discharging of batteries
Prevents over-charging of batteries
Prevents high battery temperature
Prevents excessive battery current
Keeps each individual cell in the same
condition to ensure the battery is in an
optimal condition for use
2. Replace the fuse then install the
cover back.

7. Battery Installation

Precautions
1. After opening the battery package, first check the battery and accessories. If the battery is damaged
or there is an occurrence of missing parts, please contact the vendor.
2. Ensure the battery is switched off before installation.
3. Make sure the electrical specifications of the battery are compatible with the relevant devices and
systems.
4. Keep the battery away from flame and liquid.
*In case of movement and vibration, such as in caravans and boats, the battery shall be fixed in the
following three configurations to prevent the battery from falling over.
LFP Battery Mounting Bracket
* The mounting bracket must be purchased separately
Installation Diagram
*Battery Mounting Strap
LFP Battery Wall Mounting Clamp
x4
EN
*Battery Mounting Bracket
Installation Diagram
12