Page 1
R600 in time. Please pay attention to static electricity during Contact us: the installation process. WARNING 4. Recycle and dispose of R600 in accordance with local regulation. support@ecoflow.com 5. People with disabilities or children should use the machine under www.ecoflow.com the protection of the supervisor.
Page 2
Failure to operate the product correctly may result in damage to the product or personal property and cause serious injury. EcoFlow will not assume any legal responsibility. DO NOT use the product with incompatible components or alter the product in any way without following the instructions provided by EcoFlow.
Page 3
Moisture in the device could cause short circuits, component failure, fires or even an explosion. 2. Never use NON- EcoFlow part. Go to http://www.EcoFlow.com to purchase new parts. EcoFlow takes no responsibility for any damage caused by the use of non-EcoFlow parts.
Page 4
Product Charging 1. Always use EcoFlow approved charge cables. EcoFlow does not response to any damage caused by using non-EcoFlow charging cable. 2. When charging, please place the product on the ground with no flammable or combustible materials around. To prevent accidents, never leave the battery unattended during charging.
CONTENTS R600 Extra Battery Module Use Care and Safety Guide R600 Extra Battery Module Installation Instructions Ambient Light Area Technical Specifications What’s in the Box...
R600 Extra Battery Module Use Care and Safety Guide CONGRATULATIONS! You now own the best quality portable power station Extra Battery in the world. This pamphlet is meant to help you. Please take some time to read it and install the Extra Battery Module according to the instructions on the manual.
R600 Extra Battery Module Installation Instructions Female battery socket Ambient light and signal indication 1. Female Battery Socket And Installation Instructions 1. Please make sure that the R600 is turned off. Take out the screwdriver from the extra battery module kit and locate the four screws on the bottom cover.
Page 8
Male battery socket Short screws 2. Please unscrew the 4 screws according to the figure and remove the bottom cover. You can see the male battery socket. The extra battery module should be positioned as shown in the figure. (Please note that only the bottom cover needs to be remove. Do not remove the top cover.) power a free life...
Page 9
Long screws 3. Align the male and female battery sockets and connect them. Close the botton cov- er. Take the four long screws from the kit and screw them on the screw mouth. power a free life...
Page 10
Extra battery *Ambient light module indicator area 4. Put the R600 upright and turn it on. The extra battery module’s ambient light will turn blue. If the extra battery module indicator light is shown on the R600’s display, the extra battery module is activated successfully.
* Ambient Light Area 1. Status Signals Powering up: The blue light will move from the middle to the sides Powering down: The blue light will move from the sides to the middle. Charging: The blue light will move from left to right repeatedly.
Technical Specifications General Specs Net Weight * 5.5lbs (2.5kg) Dimensions * 11.2 x 7 x 2.3in (28.5 x 18 x 5.9cm) Capacity 288Wh (28.8V) Testing and certification UL Standard, CE, FCC, RoHS Battery Cell Chemistry Lithium-ion Discharge Temperature -4 to 140°F +/-5°F(-20 to 60°C +/-3°C) Charge Temperature 32 to 113°F +/-5°F(0 to 45°C +/-3°C) Shelf Life...