Charging And Discharging The Battery - EcoFlow 5KWh LFP Battery User Manual

EN
Switching On: Press and hold the power button for 2 seconds. The battery will switch on. Short press
the power button to wake up the screen. After switching on, the display will be
illuminated and show the remaining battery level.
Switching Off: Press and hold the power button for 3 seconds. The battery will switch off.
Display Sleep: After switching on the battery via the power button, the display will remain lit for 5 mins
and will then automatically switch off. To switch the display on or off, short press
the power button.

6.2 Charging and Discharging the Battery

6.2.1 Connecting the Battery to the EcoFlow Power Kits
Connect the battery to Power Kits for charging (as follows):
7
* The LFP Battery Cable consists of an AWG4 power cable (max. continuous current 100A)
and a communication cable.
6.2.2 Connecting the Battery to Third-Party Power Systems
EcoFlow LFP Battery is compatible with most commercially available 40V~60V third-party power
systems.
The user can monitor the operating status of each battery by connecting the EcoFlow Power Kit Con-
sole or EcoFlow Wireless Communication Dongle via the RJ45 port.
RJ45 Network Port
Posistive and
Negative Studs
* Must be purchased separately
*EcoFlow Power Kit Console or EcoFlow Wireless Communication Dongle must be purchased separately.
LFP Battery
Female Port
Protection Cover
EN
8