Stairville Stage TRI LED Bundle Extension User Manual page 33

Operating mode 'Slave'
Sound-control
'd.-P4' (14 channels)
n
'd.-P5' (2 channels)
n
'd.-P6' (15 channels)
n
'd.-P7' (7 channels)
n
This setting is only relevant if the unit is operated as slave device in a master / slave configura‐
tion and is not controlled via DMX.
Press [Mode] repeatedly until the display shows 'SLAv' .
A sound-controlled automatic show can only be activated if the unit is working in stand-alone
mode or as master device in a master / slave combination. This setting is only relevant if the
unit is not controlled via DMX.
Press [Mode] repeatedly until the display shows 'SU.xx' . This will activate a sound-controlled
automatic show.
Press [Setup]. Now you can adjust the sound-control sensitivity. Use [Up] and [Down] to select a
value between 0 (low sensitivity) and 31 (high sensitivity), the display shows 'SU.00' ... 'SU.31' .
Operating
Stage TRI LED Bundle Extension
LED Lighting Set
33