Initialize Device - HIKVISION DS-K3G501S Series Quick Start Manual

DS-K3G501SX Series Tripod Turnstile Quick Start Guide
3. Power on the turnstile and it will enter the keyfob pairing mode.
4. Hold the Close button for more than 10 seconds. Or pair turnstile and keyfob in the client
software, see Manage Keyfob User of the user manual for more details.
The keyfob's indicator of the will flash twice if the pairing is completed.
5. Set the No.4 switch to OFF, and reboot the turnstile to take effect.
Note
Only one turnstile can pair the keyfob. If multiple turnstiles are in the pairing mode, the
●
keyfob will select only one of them to pair.
For details about DIP switch value and meaning, see Access Control Board Serial Port ID
●
Description .
6. Optional: Go to System → User → Keyfob User on the remote control page of the client
software to delete the keyfob.

5.2 Initialize Device

Steps
1. Remove the jumper cap of initialization pin on the access control board.
23