Advertisement
Available languages
Available languages
Figure 4
5. Close the carton lid and tape it shut as shown in
Figure 5. Taping locations are also shown on the side
flap of the shipping carton. Shurtape HP400 (72 mm
wide x 2.5 mil thick) must be used. It also must be
placed in the locations shown. Additional rolls of
HP400 tape can be purchased from Toro Service Parts
(PN 120–4608).
Figure 5
1. Tape locations
G016061
1
G016062
4
PG II (Cardboard Shipping
Container) Labeling and
Shipping
No Parts Required
Procedure
1. Write your address and contact information in the
From area of the preprinted To/From shipping decal.
2. The following decals should be placed as shown in
Figure 6:
•
Preprinted To/From shipping decal.
•
Hazardous class 9 diamond with UN3480,
Lithium Ion Batteries imprinted on it.
•
Cargo Aircraft Only decal.
G016063
1. Preprinted To/From
shipping decal
2. Hazardous class 9
diamond with UN3480,
Lithium Ion Batteries
printed on it
3. The shipping carton should be securely
strapped/banded to a pallet in the manner
similar to that shown in Figure 7.
3
3
2
1
Figure 6
3. Cargo Aircraft Only decal
Advertisement
