Toro 121-8032 Installation Instructions

Replacement Switch Kit
Mid-Size Mowers
Model No. 121-8032
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.

Loose Parts

Use the chart below to verify that all parts have been shipped.
Description
Switch
Harness

Installing the Switch

1. Disconnect the wire leads from the existing switch.
2. Remove the existing switch.
3. Insert the new switch (Figure 1).
4. Install the wire leads from the main harness to the new
harness connections (Figure 1).
5. Plug the new harness into the switch (Figure 1).
© 2013—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Qty.
1
Install the switch.
1
Register at www.Toro.com.

Figure 1

1. New switch
2. Harness
Original Instructions (EN) All Rights Reserved *3378-512* A
Printed in the USA.
Form No. 3378-512 Rev A
Installation Instructions
Use
1
2
3
4
g022347
3. Harness connections
4. Wire leads from the main
harness