Table of Contents
Advertisement
Specifications
PC/View-Win
Operating Software
Diskettes (2)
Part # 52-1001-002
Computer Requirements:
Depth Ranges:
Forward Ranges:
Transmit Frequency:
Zoom Ranges:
Pulselength and
Sounding Rates:
Transmitter Power:
Power Requirements:
Standard Equipment:
Transducer Options
Two Transom Transducers
Part # T1-0200-025
& T1-0200-028
Specifications subject to change without notice.
Acoustic Interface Module
Part # 06-2000-000
486/66 MHz CPU, minimum, available parallel port, Win95, Win98, or
WinNT operating system, 3.5" floppy drive, 10 MB available hard disk space.
Overlapping ranges; 0 to 30 ft min, 0 to 800 ft max.
Overlapping forward ranges, 0 - 50 ft. min to 0 - 1,200 ft max.
200 kHz
Variable oversampled zoom. Allows any 25% of depth to be zoomed by a fac-
tor of 4X and displayed in a split screen.
Automatically optimized for selected range.
Over 400 watts RMS (3,200 watts peak to peak)
10.5 to 16 VDC, less than 0.5 Amp.
Scan Converter, PcView32 Software on 3.5" disk, 12 VDC power cable with
in-line fuse, 10' long computer parallel cable, and operation manual. Note:
some configurations include transducer(s) with 33' of cable. (below)
Two Thru-Hull Transducers
Part # T1-0200-026
& T1-0200-029
50
Parallel Cable,
10' Length
Part # 04-1035-000
Part # 04-0001-008
Thru-Hull Transducer
Part # T1-0200-032
12 VDC Power
Supply Cable
Single
Advertisement
Table of Contents
