Switch On/Off - KBS NGWT 7-55/SN Installation, Operation And Maintenance Instructions

6.3 Switch ON/OFF

6.3.1 Turn Burner ON
1. Press and turn the Gas Control Knob to the "" Position
2. Keep press the Gas Control Knob while ignite the Pilot Burner by using match or igniter gun. Check
whether the Pilot Burner ignites.
3. Keep press the Gas Control Knob for ± 20 seconds and release the Knob.
4. If it fails to ignite, repeat the procedure (1,2,3).
6.3.2 Turn Burner OFF
1. Turn the security Gas Control Knob to the "0" position.
2. To extinguish the flame temporary, turn the security Control Knob to the position. At this position, only
Pilot flame remains lighting.
3. After cooking, extinguish all flames by turn the Gas Control Knob to "0" (zero position).
ATTENTION!
When you want to start the appliance in the cold condition (like in the morning after along time for not being used),
you have to wait at least two minutes before turning the main burners on. Therefore, thermocouple can warm up
and provide the voltage needed for the valve work.
Amicus- Gas-20190620
23
GB-Gas Wok Ring Table