Table of Contents
Advertisement
Before assembling the vacuum cleaner, check the PACKING LIST (Page 2). Use list
to verify that you have received all the components of your new Kenmore Elite SSV
Complete Cyclonic Multi-Vac.
1. Insert the wand into the hand vacuum
until you hear a click.
2. Insert one of the motorized nozzles into the
telescoping wand until you hear a click.
Click
3. Slide the battery pack along the slots
under the hand vacuum handle into the
vacuum.
4. Insert the battery charger base into the
charging dock.
ASSEMBLY INSTRUCTIONS
Click
Click
5. Mount the charging dock on the wall,
do not secure the the dock to drywall
only. Secure the screws to a stud. Use
the 2 screws provided. Mount at a
recommended height of 59" and no less
than 44" above the floor. Ensure that no
plumbing or electrical cables, wires or
ductwork are located directly behind the
mounting area.
6. Hang the hand vac handle on the wall
mount hook. Charge the unit for 3.5 hours
before using the vacuum for the first time.
- 10 -
Advertisement
Table of Contents
