Golden Technologies Compass TRO Owner's Manual page 17

Compass TRO Owner's Manual – Models GP615SS, GP615CC Revised 02/13/09
COMFORT SETTINGS
Adjusting the seat with a front to rear angle
Bottom of
Seat
Seat
Guide
Adjusting
Bolts
Loosen seat guide adjusting bolts using a 6mm Allen wrench provided in the charger
bag and a pair of pliers or a 13mm open end wrench. Place the seat receivers in the
lowest position and insert the ball detent pins through the towers and seat receiver
legs. Leave the seat guide adjusting bolts loose. Slide the seat into the receivers,
adjust seat to the desired height and angle using the (4) detent pins. Leave the seat in
the seat receivers and tighten the seat guide adjusting bolts. This process is more
easily accomplished with two people. Note: seat receivers must be 2" higher when
using NF22 battery cover.
Front Seat Locking
Handle
Seat Guides
Seat
Tower
Seat Angle
Adjusting Pins
17