Golden Technologies Compass TRO Owner's Manual page 15

Compass TRO Owner's Manual – Models GP615SS, GP615CC
Note: The batteries weigh 39 pounds each. Please ask for help if you do not feel
capable of safely lifting that much weight.
Figure 7
1. Place the batteries in the battery box. Be certain to position the terminals on each
battery toward the front of the unit as shown in Figure 7. Secure the batteries in
place using the hook and loop straps.
2. Use the screws, washers, and nuts provided to connect the positive (red booted)
connector of each cable to the positive (+) terminal of each battery. See figure 8.
3. Use the screws, washers, and nuts provided to connect the negative (black booted)
connector of each cable to the negative (-) terminal of each battery.
4. Connect the connectors of each battery cable to the corresponding connector on the
main wire harness. See figure 9.
5. Cover the battery terminals with the protective caps provided. See figure 9.
ASSEMBLY
BATTERY INSTALLATION
Figure 9
15
Revised 02/13/09
Figure 8