Golden Technologies Compass TRO Owner's Manual page 12

Compass TRO Owner's Manual – Models GP615SS, GP615CC
JOYSTICK INSTALLATION
1. Position the joystick on the joystick bracket. Match the holes in the joystick with the
holes in the bracket. See figure 1.
2. Insert the 4 Allen-head screws with lock washers through the bracket and into the
holes in the joystick.
3. Use an Allen wrench to tighten the screws.
4. Connect the joystick cable to the controller cable. See figure 2.
5. Use the provided Velcro® tie-wraps and under arm clip to secure the controller cable
to the armrest bracket.
Allen-head screws
ASSEMBLY
Figure 1
Joystick Cable
Figure 2
12
Joystick Bracket
Revised 02/13/09