Intermec Transaction Manager 9560 User Manual page 284

9560 Transaction Manager User's Manual
Code 39
Alphanumeric bar code that is discrete, variable length, and self-checking.
Character set includes a start/stop character, 10 digits, 26 letters of the
alphabet, space, and six symbols. ASCII characters are represented by the
alphanumeric characters combined with the six symbols.
Code 93
A variable length, high-density alphanumeric bar code. The complete ASCII
character set may be encoded.
Code 128
Code developed by Computer Identics that encodes the full ASCII character set
of 128 characters. Each character is represented by 11 modules and four bar
widths.
Compile and Run IRL Program character
Sent by the host to define the end of a downloaded program and tell the reader
to compile and run the program.
Computer Response Required mode (CRRM)
When enabled, the reader requires a response from the computer before the
reader will accept more data. The message must be transmitted using the
protocol currently in effect. The protocol characters only, with no data, are
sufficient.
concatenated code
A subset of Codabar symbology. Two bar code labels are read as one where the
stop code of the first label matches the start code of the second label.
configuration
The parameters selected to determine the operation of the reader.
Configuration mode
Mode used to select the parameters of the reader. One of two modes available
in the reader.
contact reader
contact scanner
A code reader (scanner) that requires physical contact between the code
medium and the scanner.
G-6