Intermec 6710 Reference Manual page 189

SECTION 6 Norand Open Wireless LAN MIB 6910 Integrated Gateway/Access Point
rcbsType
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The terminal power up type as passed by the terminal
at the beginning of an RTC session.
V4.16 of terminal software).
61 indicate 3270 emulation; 62 = 5250 emulation, 63 =
VT220; Any other value indicates Native mode."
::= { rcbsEntry 3 }
rcbsState
SYNTAX INTEGER (0..99)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Session state. 0=reset state, 1=active state."
::= { rcbsEntry 4 }
rcbsLLCIndex
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Transport connection control block identifier.
Corresponds to an lcbstIndex value."
::= { rcbsEntry 5 }
rcbsHostDataCount
SYNTAX Counter
ACCESS read-only --read-reset
STATUS mandatory
DESCRIPTION
"Number of data blocks received from the host."
::= { rcbsEntry 6 }
rcbsBlocksXmit
SYNTAX Counter
ACCESS read-only --read-reset
STATUS mandatory
DESCRIPTION
"Total number of blocks passed to the network."
::= { rcbsEntry 7 }
rcbsDataXmit
SYNTAX Counter
ACCESS read-only --read-reset
STATUS mandatory
DESCRIPTION
"Number of data blocks passed to the network."
::= { rcbsEntry 8 }
rcbsBlocksRecv
SYNTAX Counter
ACCESS read-only --read-reset
STATUS mandatory
DESCRIPTION
"Total number of blocks received from the terminal."
::= { rcbsEntry 9 }
Norand
OBJECT-TYPE
(Unused until
Values: 11, 21, 46, 47,
OBJECT-TYPE
OBJECT-TYPE
OBJECT-TYPE
OBJECT-TYPE
OBJECT-TYPE
OBJECT-TYPE
R
Management Information Bases Reference Manual 6-73