Setting The Security Id - Intermec 0100A User Manual

Setting the Security ID

This is for the illustrations
As an added security measure, the Access Point allows you to set a security ID
for each RF product installed on a network. All RF products must have
matching security IDs in order to communicate.
To set the security ID
1. From the main menu, use the down arrow key to select the Access Point
2. Choose Select. The configuration dialog box appears.
3. Choose Configure 2.4 GHz RF. The 2.4 GHz RF Configuration dialog box
4. Choose Set Security ID. The Security ID dialog box appears.
5. Enter a security ID for the Access Point.
6. Choose OK to exit this dialog box and return to the 2.4 GHz RF
7. Choose OK to return to the configuration dialog box.
you want to assign a security ID.
appears.
Configuration Dialog box.
Configuring the Access Point
3
3-17